Starting The Espedeo Supra-5000; Switching On The Projector - GDC Espedeo Supra Supra-5000 User Manual

1. Starting the Espedeo Supra-5000

1.1 Switching ON the Projector

Before powering ON the Espedeo Supra-5000 digital cinema and secured media projection system, please ensure
the environmental requirements (refer to Table 1) for the safe operation of the Projector are met:
Surroundings
Ambient Temperature
Humidity
Air Cleanliness
Altitude
Additionally, please ensure the following in accordance with the Espedeo Supra-5000 Installation manual:
1. The Projector is mounted correctly and is connected to the power supply of the correct rating.
2. The Projector is equipped with a suitable lens.
3. If an external video source such as a Blu-Ray player is used, please ensure that it is connected to
the HDMI port on the projector PIB board, before powering ON the projector.
After confirming the above points, connect the power cable to a recommended power outlet (as specified in the
Espedeo Supra-5000 Installation manual) and turn ON the power source to the projector. After approximately 5
minutes, the projector will be powered ON.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
During Operation
5 °C to 35 °C
10% to 85% (non-condensing)
Neat office environment (in compliance
with the Cleanroom Standard
ISO 14644-1 Category 9)
-60 to 3000 meters
Table 1
- 6 -
Non-Operating Period
-10 °C to 60 °C
5% to 90% (non-condensing)
Not applicable
-60 to 10000 meters
th
May 05 , 2021