Installation → Light Source File Settings - GDC Espedeo Supra Supra-5000 User Manual

Installation → Light Source File Settings
Light Source files are configured based on the brightness of light output by the projector. Therefore, you
can set different light source files to achieve different luminous fluxes of the projector.
The light source file defines a percentage based on the maximum luminous flux output by the projector,
configured by setting differentiated proportions downwards.
SN Name
①
New Light Source File
②
Light Source file list
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 64:
Click on this button to create a new light source file. This button is enabled when
you set the light source file.
NOTE: The Laser Power should not be set below 30% in any light source file.
Lists the light source files of the projector. By default, there are 50% and 100% light
source files, indicating that the maximum luminous flux output by the projector is
50% and 100% respectively.
You can create suitable light source files according to the actual brightness.
Table 13
- 58 -
Function Description
th
May 05 , 2021