GDC Espedeo Supra Supra-5000 User Manual page 137

[Audio]
6
Offset
Output Sampling Rate
Channel Mapping
Enable LTC Output on
Channel 15/16
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 119:
Specify an audio delay during playback. A negative audio delay
will cause audio to be played ahead of the video. A positive audio
delay will cause audio to be played behind the video.
Changes the audio output sampling rate. Output audio sampling
rate can be fixed at 48kHz or 96kHz for all content or it can match
the content's audio sampling rate (option 'None'). If the output
sampling rate is set to a fixed value (48kHz or 96kHz), content
audio is re-sampled if it does not match the output sampling rate.
Use the Audio Channel Mapping interface to map content audio
channels to different audio output channels.
Refer to Section 4.6.2.1 for details related to
Audio Channel Mapping.
Enables LTC output on Channel 15/16 which would be
needed for supporting 4D devices.
- 137 -
th
May 05 , 2021