Editing The 2D-Flat Macro; Editing The 2D-Scope Macro - GDC Espedeo Supra Supra-5000 User Manual

3.3.1.1 Editing the 2D-FLAT Macro

Click on the
source file and lens file. Click 'Load File' and import the preset source file, screen file, 2D color file,
light source file and lens file in sequence. Click 'Save'. The macro will be successfully edited.
NOTE: By default, the source file and PCF file under this macro are imported and the 3D file
cannot be selected.

3.3.1.2 Editing the 2D-SCOPE Macro

Click on the
source file and lens file. Click 'Load File' and import the preset source file, screen file, 2D color file,
light source file and lens file in sequence. Click 'Save'. The macro will be successfully edited.
NOTE: By default, the source file and PCF file under this macro are imported and the 3D file
cannot be selected.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
icon under the 2D-FLAT macro. Select the source file, screen file, color file, light
Figure 48:
icon under the 2D-SCOPE macro. Select the source file, screen file, color file, light
Figure 49:
- 46 -
th
May 05 , 2021