Configuration → Image; Image → Image Source - GDC Espedeo Supra Supra-5000 User Manual

Configuration → Image
The Image sub-tab can be used to set up test patterns, configure 3D settings, set masking and configure
settings related to color processing and color correction for the projector. These options are to be used
during the initial setup and calibration of the Supra-5000 projector.
CAUTION: The options present under the Image sub-tab are NOT intended to be used by normal
users/operators and they should refrain from changing any settings present under this tab. These settings
are meant to be used specifically by personnel who are authorized/certified to install the projector, for the
initial setup and calibration.
4.6.6.1 Image → Image Source
SN
1
[Image From:]
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 135:
Name
Allows the user to select the image source for the projector.
This drop-down has two options:
•
DCP
•
Test Pattern
The DCP option should be selected for playback of compliant
DCP content, during the normal operation of the projector.
Function Description
- 161 -
th
May 05 , 2021