GDC Espedeo Supra Supra-5000 User Manual page 57

⑧
File Name
⑨
Save and Calibrate
NOTE:
▪
Before proceeding with color calibration, it is recommended to perform the lens back focus adjustment
and DMD convergence (refer to Supra-5000 Installation Manual for more details).
▪ For 2D color calibration, set the color type to '2D'.
▪ For 3D color calibration, set the color type to '3D'. By default, the 'DEFAULT-3D' device is used for
3D color calibration.
▪
While performing a 3D color calibration, the 3D filter unit should be placed in front of the projector lens
and measurements should be taken through a pair of 3D glasses.
▪
The corrected color files should be differentiated between 2D and 3D and used for the corresponding
2D or 3D macros.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Enter a name for the new color file. It is recommended to name the 2D and 3D
color files separately, for example, "2D_DCP" or "3D_DCP".
Save and calibrates the current color file, as shown in Figure 63.
Checks whether the color is within the standard range after calibration. If yes, it
is qualified. Otherwise, you need to find the reason.
Table 12
Figure 63:
- 57 -
th
May 05 , 2021