GDC Espedeo Supra Supra-5000 User Manual page 165

3 [Masking]
Set Mask
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Allows the user to set the masking for the projected image. To enable
masking, select the Masking
To adjust the screen masking, drag the adjustment points to the
desired coordinates or curvature. You can also click on a particular
adjustment point and enter the corresponding 'X and Y' or 'Curve'
values. Click on the Reset All button to reset all the adjustment points.
Click on the Save button to apply the masking to the projected
image.
NOTE: The screen masking adjustments which are done from the
section (Configuration → Image → Image Source) will
Masking
not override or be saved to the Screen file of the currently selected
Macro. These masking adjustments will be lost as soon as the user
selects the same or a different Macro from the Macro Settings
section of the Supra Command Center.
Table 77:
- 165 -
checkbox and click the Set Mask button.
th
May 05 , 2021