b)
If the selected
The user can specify the value (in milliseconds) under the
create a time delay between two consecutive actions within the cue.
c)
If the selected
1.
2.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
is 'Timer', then the
Device
is 'IMBGPIO', then the
Device
If 'Coil' is selected as the
Action
Param
option:
If 'Register' or 'Level' is selected as the
from the
Param
option. The number of pins selected (left section) will be the number of
pins shown as enabled (right section). The user may select multiple pins (right section)
based on the number of pins selected (left section).
type will be 'Delay (ms)'.
Action
Param
type can be 'Coil', 'Register' or 'Level'.
Action
type, only one pin can be selected at a time from the
Action
type, multiple pins can be selected
- 92 -
option. This can be used to
May 05
th
, 2021