Connecting The Espedeo-5000 To An Hdmi Source - GDC Espedeo Supra Supra-5000 User Manual

2.3 Connecting the Espedeo-5000 to an HDMI Source

As illustrated in Figure 33; the Espedeo Supra-5000 can playback content from an HDMI output source
(Timing:1080p@60Hz) such as a Blu-Ray player, Set-Top Box, etc. Using an HDMI cable, you need to connect
the HDMI port on the HDMI output source, to either HDMI IN 1 or HDMI IN 2 port on the projector PIB.
Once connected, select the corresponding HDMI Macro i: e 'HDMI1' or 'HDMI2' from the Home screen of the
Supra Command Center interface to initiate playback (as shown in Figure 34).
NOTE: Please ensure that the HDMI cable from the HDMI output source is connected to the HDMI port on the
projector PIB board, before powering ON the projector.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 33:
Figure 34:
- 34 -
th
May 05 , 2021