Lubrication To Needle Bar Case - Brother BES-1261BC Instruction Manual

Chapter 1 Preparation of Embroidery Machine

3-6 Lubrication to Needle Bar Case

Proper lubrication is necessary for keeping the machine head in good condition.
Turn off the power switch before starting any cleaning work, otherwise the machine may operate if the start
switch is pressed by mistake, which could result in injury.
32
CAUTION
Before operating the machine for the first
time after unpacking or after leaving the
machine without operation for a long
period of time, supply one or two drops of
oil to two sections of the needle bar. (See
the left figure.)
Note) • Use the Brother's specified embroidery ma-
BES-961BC
BES-1261BC
BES-961BC BES-1261BC
chine oil (Nisseki Embroidery Lube No. 10
or the equivalent).
• Supplying an excessive amount of oil will
cause dripping onto the material.