Thread Trimming Length
Length of thread to leave on the needle bar after thread trimming can be set for
each needle bar.
This function is previously set to 5 upon shipments.
1.
Press
.
2.
Select
by pressing
3.
Press
.
4.
Select a needle bar to modify by pressing
Press
for setting the same speed range for all needle bars.
5.
Input thread length by pressing ten keys.
Thread length can be input within the range of 1 ~ 10. Length decreases as the figure decreases.
When inputting "10", press the
6.
After setting is finished with all needle bars, press
Modified setting is saved and the previous screen is displayed again.
Thread Withdrawal Feed Length
Thread withdrawal length can be set before thread trimming.
The input range is 0 ~ 100mm.
This function is previously set to 15mm upon shipments.
BES-961BC • BES-1261BC
.
.
0
first.
SPACE
Chapter 5 Setting
.
END
101