Other Editing - Brother BES-1261BC Instruction Manual

Chapter 4 Editing of Embroidering Data

Other Editing

Setting of other functions related to editing is available.
The following types of setting is available.
1.
2.
0 Stitch Deletion
3.
4.
86
0 stitch deletion
Thread trimming feed number
Swing width correction
Read sewing data.
Press three times.
Select this function by pressing
Press after setting is finished.
E N D
Press when setting continuously.
BES-961BC • BES-1261BC
For deleting stitches at the same point without
stepping forward or back.
This function is previously set to
0stitch)upon shipment.
For deleting 0 stitch
For not deleting 0 stitch
For setting the number of feeds for thread trimming
This function is previously set to
or (Except ECS data)upon shipment.
For thread trimming at every 3 feeds
For thread trimming at every 5 feeds
For thread trimming at every 8 feeds
For not thread trimming
For setting the needle swing width correction amount
The correction amount can be set in increments of 0.1mm.
The setting range is 0 ~ 1.0mm in both the X and Y
directions. (The setting range is displayed as "0 ~
10" on the screen.)
Compensation is reflected only on the satin-stitched
section.
This function is previously set to 0(no swing width
correction)upon shipment.
.
(for not deleting
(ECS data)