Measures Against Thread Breakage; Remedies - Brother BES-1261BC Instruction Manual

Chapter 6 Operation of Machine

3. Measures against Thread Breakage

3-1 Remedies

120
1. If embroidering is suspended due to thread
2. Correct the broken thread and pass it through
3. Press the STOP switch or press the STEP
4. Return the hoop to a position where thread
THREAD
SENSOR lamp
HEAD switch
MENDING
lamp
MENDING
switch
STEP BACK/
FWD switch 5. Press the START switch on the operation
3-2 Mending
BES-961BC BES-1261BC
breakage, the THREAD SENSOR lamp of the
machine head with a thread breakage blinks.
again.
* Refer to "Chapter 1, 4-1 Upper Threading" (
for details.
BACK/FWD switch in order to reset the alarm.
STOP
breakage occurred by pressing the STEP
BACK switch.
or
Note) When the switch is turned for 20 stitches or more,
the machine continues operation without holding
the switch. To stop the machine, turn the switch
to the opposite side.
panel or the start switch located between the
machine heads to resume operation.
or
START
Page 34)