Inching Mode During Embroidering (Forcible Hoop Movement) - Brother BES-1261BC Instruction Manual

Chapter 6 Operation of Machine

7-2 Inching Mode during Embroidering (Forcible Hoop Movement)

Note) • Moving the frame greatly in the inching mode may cause an interference with the machine.
Pay utmost care in the inching mode.
• The frame movement in inching mode is cleared when the power is turned OFF; therefore, if the power is turned
O N a g a i n a n d s e w i n g i s s t a r t e d , t h e p a t t e r n m a y b e e m b r o i d e r e d i n a d i f f e r e n t
position. Be sure to use the inching mode appropriately.
126
1. Press the
in order to select the inching mode.
2. Press the jog switch and the hoop moves to
the direction of the pressed switch.
Note)
3. Pressing the "END" switch
resets the inching mode.
4. Press the "START" switch
restarts embroidering.
BES-961BC BES-1261BC
while pressing the
• Note that the forcible hoop movement will pro-
duce deviation of embroidering by the amount.
• If the hoop and material are deviated from each
other during embroidering, correct it by using
the jog switches.
switch
STOP
END
START