Chapter 1 Preparation of Embroidery Machine
1. Specifications
Embroidery machine used
Application
Sewing speed
Sewing area
Feed system
Stitch length
Storage medium
Thread trimming
Needle thread breakage
Power supply
Weight
Dimensions
Options
18
9 needle embroidery machine head
(six-head type)
Pattern embroidery
Maximum 1000 spm
450 (V) x 400 (H) mm (border frame area)
430 (V) x 300 (H) mm (tubular square hoop area)
85 (V) x 360 (H) mm (cap frame area)
450 (V) x 600 (H) mm (with bed retracted or with head control)
By timing belt and stepping motor drive
0.1 ~ 12.7 mm (minimum pitch: 0.1 mm)
3.5 2DD floppy disk (Tajima format)
3.5 2HD floppy disk (the equivalent to Tajima format)
3.5 2DD floppy disk (Barudan FDR/FMC format)
Automatic thread trimmer
Needle thread breakage detector
Single phase 200 V, 220 V, 230 V, 240 V,1.7 kVA
720 kg
(Before assembly) 3650 (W) x 810 (L) x 1650 (H) mm
(After setup)
3650 (W) x 1400 (L) x 1650 (H) mm
(Distance between machine heads) 400 mm
Embroidery hoops in different sizes, Bobbin winder,
Parts for boring
BES-961BC BES-1261BC
12 needle embroidery machine head
(six-head type)
720 kg