Registration of Embroidery Data from BE-100
Connect the operation panel and the personal computer with BE-100 installed in
order to register the embroidery data into the machine memory.
1.
Connect the personal computer with BE-100 installed and the operation panel
by means of the RS-232C cable.
Personal computer with BE-100 installed
2.
Press the
3.
Select the data registration screen by pressing the
4.
Select an area for data registration by pressing ten keys or
press the
key.
5.
Press the
.
BES-961BC • BES-1261BC
Dedicated communication cable (Option)
.
When a floppy disk is set
When no floppy disk is set
Chapter 3 Selection of Data and Embroidering
Operation panel
.
, and then
65