Brother BES-1261BC Instruction Manual page 89

Thread Trimming Feed Number
3. Select this function by pressing
4. Select the number of feeds by pressing
5. Press after setting is finished.
END
Swing Width Correction
Correction values within 1 ~ 10 can be input. However, excessively large values
may result in distortion of a pattern.
3. Select this function by pressing
4. Select a correction amount in the X direction by pressing
5. Reverse by pressing
6. Input a correction amount in the Y direction by pressing
BES-961BC • BES-1261BC
Chapter 4 Editing of Embroidering Data
.
.
.
.
.
.
87