Automatic Step-Back - Brother BES-1261BC Instruction Manual

Chapter 5 Setting
4.
5.
The number of stitches to step back automatically in case of a thread breakage can
be set.
1.
2.
3.
4.
94
Input sensitivity of the thread breakage sensor.
Press .
E N D
Modified setting is saved and the previous screen is displayed again.

Automatic Step-Back

Setting can be done within the range of 0 ~ 10 stitches.
This function is previously set to 0 stitches upon shipments.
Press twice.
Select by pressing
Input the number of stitches to step back automatically by pressing ten keys.
Pressing sets whether to execute an extra step-back by a sensitivity amount of the thread
breakage sensor in the automatic step-back mode.
When stepping back by a sensitivity
amount of the thread breakage sensor
When stepping back by preset number of
stitches
Press .
END
Modified setting is saved and the previous screen is displayed again.
BES-961BC • BES-1261BC
.
Total number of stitches to step back in
the automatic step-back mode