Brother BES-1261BC Instruction Manual page 134

Chapter 7 Maintenance
BES-961BC
Lubricate the following part indicated by the arrow ("clearance" between the connecting rod
and the needle thread take-up bearing) once a week.
(Note) • In lubrication, select needle bar 9 and remove arm cover L to check the lubrication area. Be sure to wipe
off excessive oil spilt at the lower part of the arm.
Connecting rod
BES-1261BC
Lubricate the following part indicated by the arrow ("clearance" between the connecting rod
and the needle thread take-up bearing) once a week.
(Note) • In lubrication, select needle bar 12 and remove the head cover to check the lubrication area. Be sure to
wipe off excessive oil spilt at the lower part of the arm.
Connecting rod
132
Thread take-up bush
Arm cover L
Thread take-up bush
head cover
BES-961BC BES-1261BC
Connecting
rod
Connecting rod