Setting The Ring Volume; Memory Storage; Tx Lock - Brother 8060P MFC-9060 Owner's Manual

Brother industries owner'smanual fax 8060p mfc-9060
Table of Contents

Advertisement

Setting the Ring Volume

You can adjust the ring volume when your machine is idle. You can turn
the ring OFF.
Press
or
to adjust the volume level. With each key press, the
machine rings so you can hear the current setting and the display shows
the setting you are choosing.
Each key press changes the volume to the next setting.
The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP,
SETUP RECEIVE, SET QUICK-DIAL and REMOTE FAX OPT,
plus the COVERPG SETUP and COVERPAGE NOTE (from SETUP
SEND) functions are stored permanently.

TX Lock

This feature allows you to prevent unauthorised access to the fax
machine. When switched ON, TX Lock prohibits most functions. The
following functions listed are available while TX Lock is switched ON.
Receiving faxes
Answering & making telephone calls with an external telephone
Scheduled Delayed Transmission*
Polling*
Fax Forwarding*
Remote Retrieval
* Provided it was set before TX Lock was switched ON.
I N I T I A L S E T U P
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

8060p - fax b/w laserFax-8060pMfc-9060

Table of Contents