Custom; Prescanning An Image - Brother 8060P MFC-9060 Owner's Manual

®
U S I N G S C A N S O F T ™ P A P E R P O R T F O R B R O T H E R A N D
131
®
S C A N S O F T ™ T E X T B R I D G E ( F O R M F C - 9 0 6 0 O N L Y )

Custom

Size
Set the Size to one of the following:
• Letter (8 1/2 x 11 in.)
• 4 (210 x 297 mm.)
• Legal (8 1/2 x 14 in.)
• A5 (148 x 210 mm.)
• B5 (182 x 257 mm.)
• Executive (7 1/4 x 10 1/2 in.)
• Business Card (60 x 90 mm.)
• Custom (User adjustable from 0.35 x 0.35 in. to 8.5 x 14 in.)
After you select a custom size, you can adjust the scanning area further
by using the left mouse button to drag the dotted outline of the scanning
area. This is required when you want to crop an image when scanning.
Business Card Size
To scan business cards, select the Business Card (60 x 90 mm.) size
setting and place the business card at the top center of a carrier sheet.
Carrier sheets are available from your Dealer.
When scanning photographs or other images for use in a word processor
or other graphics application, you should try different settings for the
contrast, mode and resolution to see which settings best suit your needs.

PreScanning an Image

PreScanning allows you to scan an image quickly at a low resolution. A
thumbnail version of the image will appear in the Scanning Area. This is
only a preview of the image so you can see how it will look. The
PreScan button is used to preview an image for cropping any unwanted
portions from the image. When you are satisfied with the preview, select
the Start button to scan the image.
1
Insert document face down in document feeder of the machine.