Brother 8060P MFC-9060 Owner's Manual page 177

Brother industries owner'smanual fax 8060p mfc-9060
Table of Contents

Advertisement

Memory Status List Shows how much memory is being used, how
much is left, and the type of messages in memory.
One Touch Dial Keys on the machine control panel where you can store
numbers for easy dialling. You must use a separate key for each
number.
Out of Paper Reception Receives faxes into the machine's memory
when the machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Pause Allows you to place a 3.5 second delay in the dialling sequence
stored on One Touch and Speed Dial numbers.
Photo Mode A resolution setting that uses varying shades of grey for the
best representation of photographs.
Polling The process of a fax machine calling another fax machine to
retrieve waiting fax messages.
Pulse A form of dialling on a telephone line.
Print reduction reduces the size of incoming faxes.
Quick-Dial List A listing of names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Remaining Jobs You can check which jobs are waiting in memory and
cancel jobs individually.
Remote access The ability to access your machine remotely from a
touch tone phone.
Remote activation allows you to transfer a fax call, answered at an
extension phone, to the machine.
Remote access code The four-digit code that allows you to call and
access your machine from a remote location.
Resolution The number of vertical and horizontal lines per inch. See:
Standard, Fine, Super Fine, Photo.
Ring Delay The number of telephone rings before the machine answers
a call in Fax/Tel (F/T) or Fax Only Mode.
Ring Volume Volume setting for the machine's ring.
Rotary A form of dialling on a telephone line.
Speaker Volume You can set the volume when your machine is onhook.
Speed Dial A preprogrammed number for easy dialling. You must press
the Sear ch/Speed Dial key, press #, and then two digit code to
start the dialling process.
Standard resolution 98 x 203 dpi. It is used for regular size text and
quickest transmission.
167
G L O S S A R Y

Advertisement

Table of Contents
loading

This manual is also suitable for:

8060p - fax b/w laserFax-8060pMfc-9060

Table of Contents