Setting The Print Density; Toner Save - Brother 8060P MFC-9060 Owner's Manual

42
C H A P T E R F I V E

Setting the Print Density

If your machine is printing too light or too dark, you can adjust the print
density level. The new setting will remain until you change it again.
1
Press Menu, 2, 7.
2
Press or to select your setting. Each key press changes the print
density to the next setting.
3
When the screen shows the setting you want, press Set.
4
Press Stop to exit.

Toner Save

You can conserve toner using this feature. When you set Toner Save to
ON, print appears somewhat lighter. The default setting is OFF.
1
Press Menu, 2, 9.
2
Press or to turn ON (or OFF).
3
Press Set.
4
Press Stop to exit.