Table of Contents
Advertisement
8
The screen prompts you to select the type of number this is. Use
or
9
Press Set.
10
Return to Step 2 to store another Speed Dial number. ––OR–– Press
Stop to exit.
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where
a number is already stored, the screen displays the current name stored
there, then prompts you to either change it or exit.
1
Press 1 to change the number stored, or press 2 to exit without
making a change.
2
Enter a new number.
3
Follow the directions in Storing One Touch Dial or Speed Dial
Numbers.
See
"Storing
Setting Up Groups for Broadcasting
One Touch
Dial
Groups allow you to send the same fax message to many fax numbers by
Numbers"
pressing only one One Touch key. (This is called Broadcasting.) First,
and
you'll need to store each fax number as a One Touch or Speed Dial
"Storing
Speed Dial
number. Then, you can combine them into a Group. Each Group uses up
Numbers"
a One Touch key. Finally, you can have up to 6 small Groups, or you can
in this
assign up to 45 (FAX-8060P) or 37 (MFC-9060) numbers to one large
chapter
Group.
You can include up to 15 (FAX-8060P) or 7 (MFC-9060) One Touch
locations, or up to 30 Speed Dial locations. If you broadcast to more than
the maximum locations available, you will be unable to set up
transmissions using Dual Access and the Timer.
S E T U P Q U I C K - D I A L N U M B E R S
to select the type you want.
FAX
a fax number
TEL
a telephone (voice) number
F/T
both a fax and telephone number
1.CHANGE 2.QUIT
If you want to erase the number, press Stop when the cursor is
to the far left of the digits. The letters above and to the right of
the cursor will be deleted.
If you want to change a digit, use
under the digit you want to change, then enter it.
or
to position the cursor
67
Advertisement
Table of Contents
