Table of Contents
Advertisement
7
Press 1 if you want to select additional settings. The display returns
to the SETUP SEND menu. ––OR–– Press 2 if you have finished
choosing settings and go to Step 8.
8
Press Start and wait for the fax to be polled.
Cancelling a Job While Scanning the
Document
You can cancel a job while you are scanning it into memory by pressing
Stop. Eject the document by pressing Stop again.
Cancelling a Job in Memory
You can cancel a job that is waiting in memory.
If the machine is idle,
1
Press Menu, 4.
Any waiting jobs appear on the display. If nothing is waiting, the
screen displays NO JOB WAITING.
4.REMAINING JOBS
2
If you have more than two jobs waiting, use
you want to cancel. Press Set when the screen displays your
selection.
—OR—
If you have only one job waiting, go to Step 3.
#02 SALES REPORT
1.CLEAR 2.QUIT
3
Press 1 to cancel. —OR— Press 2 to exit without cancelling.
To cancel another job, return to Step 2.
4
Press Stop to exit.
If the machine is busy, press Stop, then follow Steps 2 through 4 to
cancel a job.
You can check which jobs are remaining in memory by following Steps 1
and 2 above.
S E T U P S E N D
or
to select the job
63
Advertisement
Table of Contents
