Replacing The Toner Cartridge; Steps For Replacing Toner Cartridge - Brother 8060P MFC-9060 Owner's Manual

152
C H A P T E R S E V E N T E E N

Replacing the Toner Cartridge

The machine can print approximately 2,200 pages with one toner
cartridge (TN-200). When the toner cartridge is running low, the display
shows CHANGE TONER. The machine is supplied with a starter toner
cartridge that must be replaced after approximately 1,000 pages. Actual
page count will vary depending on your average document type (i.e.
standard letter, detailed graphics). The above specifications relate to a
5% black coverage A4 size document.
It is a good idea to keep a new toner cartridge ready for use when you
see the toner low warning.
Discard the used toner cartridge according to local regulations. If you are
not sure of them, consult with Brother dealer for service. Be sure to seal
the toner cartridge tightly so toner powder does not spill out of the
cartridge. When discarding used toner cartridges, keep them separate
from domestic waste.
It is recommended that you clean the machine when you replace the
toner.
The display shows TONER EMPTY to indicate that the toner is empty.
Once this indication appears, your machine will not resume printing until
you have installed a new toner cartridge.

Steps for Replacing Toner Cartridge

WARNING
After you have just used the machine, some internal parts of the machine
will be extremely HOT! So, never touch the shaded parts shown in the
illustration below.
HOT!
Inside the machine