Retrieving The Memory Status List; Retrieving Fax Messages - Brother 8060P MFC-9060 Owner's Manual

Retrieving the Memory Status List

You can retrieve the Memory Status List from a remote fax machine to
see if you have any fax messages.
1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access
Code (the factory setting is 1 5 9 ).
3
When you hear two short beeps, use the dial pad to press 9 6 1.
4
Using the dial pad, enter the number (up to 20 digits) of the remote
fax machine where you want the Memory Status List forwarded, and
then press # #.
You cannot use
store a pause, press #.
5 After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. Your fax machine
then sends the Memory Status List to the fax machine that you are
calling from.

Retrieving Fax Messages

1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access
Code (the factory setting is 1 5 9 ).
3
As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4
Using the dial pad, enter the number (up to 20 digits) of the remote
fax machine where you want your fax messages forwarded, and then
press # #.
You cannot use
store a pause, press #.
5 After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. The fax machine
that you are calling from prints your fax messages.
R E M O T E F A X O P T I O N S
and # as dial numbers. However, if you want to
and # as dial numbers. However, if you want to
77