Using The Control Panel Keys; Scan Image; Scan/Ocr - Brother 8060P MFC-9060 Owner's Manual

U S I N G T H E W I N D O W S

Using the Control Panel Keys

®
– B A S E D B R O T H E R C O N T R O L C E N T R E
Before you can use the Scan key on the control panel, you must have
connected the MFC to your Windows
appropriate Brother Drivers for your version of Windows
are ready to use the Scan key, make sure the Brother Control Centre
application is running on your PC.

Scan Image

You can scan a picture into your graphics application for viewing and
editing.
1
Place the original face down in the ADF.
2
Press Scan.
SCANNING:IMAGE
SELECT { } & SET
3 to select SCANNING:IMAGE and press Set.
Press or
The MFC will scan the original and send an image to your graphics
application.

Scan/OCR

If your original is text, you can have it automatically converted by
ScanSoft™ TextBridge
your word processing application for further editing.
1
Place the original face down in the ADF.
2
Press Scan.
SCANNING:OCR
SELECT { } & SET
3
to select SCANNING:OCR and press Set.
Press or
The MFC will scan the original, perform OCR in ScanSoft™
®
TextBridge , and then display the result in your word processing
application for viewing and editing.
( F O R M F C - 9 0 6 0 O N L Y )
®
-based PC and loaded the
®
to an editable text file and then displayed in
113
®
. When you