Setting The Ring Volume; Setting The Beeper Volume; Setting The Speaker Volume - Brother FAX-2920 User Manual

Chapter 2

Setting the Ring Volume

You can turn the ring Off or you can select
the ring volume level.
1
Press Menu/Set, 1, 4, 1.
1.Ring
2
Press ▲ or ▼ to select Low , Med , High
or Off .
Press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your
machine is idle (not being used).
In mode (Fax), press
adjust the volume level. Every time you press
these keys, the machine will ring so you can
hear the active setting as the LCD shows it.
The volume changes with each key press.
The new setting will stay until you change it
again.
2 - 6

Setting the Beeper Volume

You can change the beeper volume. The
default setting is Med . When the beeper is on,
the machine will beep when you press a key,
make a mistake, or after you sent or received
a fax.
1
2
3

Setting the Speaker Volume

or to
You can adjust the machine's one-way
speaker volume.
1
2
3
Press Menu/Set, 1, 4, 2.
2.Beeper
Press ▲ or ▼ to select Low , Med , High
or Off .
Press Menu/Set.
Press Stop/Exit.
Press Menu/Set, 1, 4, 3.
3.Speaker
Press ▲ or ▼ to select Low , Med , High
or Off .
Press Menu/Set.
Press Stop/Exit.