Table of Contents
Advertisement
4
C H A P T E R
Initial
Setup
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial
line, you can change the setting to PULSE by following the steps below.
1
2
3
4
Setting the Date and Time
Your machine displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the machine maintains date and time
information for about 12 hours. All other settings remain unaffected.
1
2
F O U R
Press Menu, 1, 1.
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
DIALLING:PULSE
Use
or
to select the dialling mode.
Press Set when the screen displays the dialling mode you want.
Press Stop to exit.
Press Menu, 1, 2.
The screen prompts you to enter the year.
ENTER YEAR:XX
Enter the last two digits of the year. The screen displays your entry.
27
Advertisement
Table of Contents
