Brother 8060P MFC-9060 Owner's Manual page 33

2. SETUP RECEIVE
Function Description
1. RING DELAY Number of rings before the
machine answers in Fax/Tel
(F/T) or Fax Mode.
2. F/T RING TIME Sets the time for "F/T pseudo-
ring" in Fax/Tel (F/T) Mode.
3. FAX DETECT Receive fax messages without
pressing the Start key.
4. REMOTE CODE Enter a code to activate or
deactivate your machine from a
remote location.
5. REDUCTION Reduces size of image.
6. MEM. RECEIVE Automatically stores any
incoming faxes in its memory
if it runs out of paper.
7. PRINT DENSITY Adjusts printing to be lighter or
darker.
8. POLLING RX You call another fax machine to --
receive a fax from it.
9. TONER SAVE Increase life of toner cartridge.
3. SETUP SEND
Function Description
1. COVERPG SETUP Automatically sends a
programmable cover page or
prints a sample coverpage.
2. COVERPAGE NOTE Program a customized message
for fax cover page.
3. CONTRAST Change the lightness or
darkness of a fax you are
sending.
4. RESOLUTION Allows you to change
resolutions page by page.
5. OVERSEAS MODE Special setting for international
transmissions.
6. CALL RESERVE You can send a fax, then speak
to the person operating the
other fax machine or print a
sample call back message.
7. TIMER Set the machine to send your
documents later.
O N - S C R E E N P R O G R A M M I N G
Factory Set Chapter
02 5
30 5
ON 5
OFF 5
( 51, #51)
AUTO 5
ON 5
-- 5
5
OFF 5
Factory Set Chapter
OFF 6
-- 6
AUTO 6
STANDARD 6
OFF 6
OFF 6
-- 6
23