Remote Control Without Own Ip Address, Behind A Router - OM POWER OM2000A+ Manual

7.5.3 Remote Control without own IP Address, behind a router

If you need to change the OM2000A+ connection settings for some reason, use point 7.5.1 above.
Change router´s settings
Open Firewall Settings (depends on router software, can be called Forwarding, Port Forwarding, or something
similar). As Server IP enter the OM2000A+ IP Address, 192.168.1.211 if you haven't changed it, or the one you
changed to in point 7.5.1. Private port should be 10001 in default, or the one you changed to in point 7.5.1. Some
routers don't have separate Public Port settings. Enter an available port number (usually the default 10001 is free
and usable). Check the Enable box too. When done, click OK (or Save).
Open up a WEB browser and enter the
router´s internal
192.168.1.1)
Type of supported TCVR and working
frequency are visible on the display.
An authentication window WILL APPEAR. You
need to enter the routers login and password.
Usually a router´s default login is "admin" or
Type of supported TCVR and working
"administrator" and default password "admin" or
frequency are visible on the display.
an empty field.
IP Address ( usually
AUTO LED is ON.
AUTO LED is ON.
44