OM POWER OM2000A+ Manual page 32

Never try to change or move any part inside the amplifier except the tube or fuses.
Substitution of parts may void intrinsic safety!
Manufacturer's contacts:
Dealer in the USA:
OM POWER, s.r.o.
930 30 Báč 126
SLOVAKIA
Email: om-power@om-power.com
Array Solutions
2611 North Belt Line Road
Suite # 109
Sunnyvale, TX 75182
Tel: (214)954-7140
Email: sales@arraysolutions
This is an example from a previous attempt
Type of supported TCVR and
at transmitting when the antenna was
disconnected from the PA . Reflected
frequency are visible on the
power was higher than 250W and a
warning message "Reflected power too
high" appeared.
AUTO LED is ON.
If you touch the yellow "last events" box on
Type of supported TCVR and
the PA touch screen it will display the
warning details.
frequency are visible on the
In the case of hardware failure or if your
power amplifier is not working properly,
please contact the manufacturer or your
local dealer.
AUTO LED is ON.
.
com
working
display.
working
display.
32