Type of supported TCVR and working
Use next lines and set brightness and
sound
volume
(use
frequency are visible on the display.
left/right). Confirm with SAVE.
Press NETWORK SETTING and then
press ENTER.
Type of supported TCVR and
frequency are visible on the display.
AUTO LED is ON.
Here the user has the option to set IP
Type of supported TCVR and
Address, Network mask, Default gateway,
Port number.
frequency are visible on the display.
User can enable or disable IP parameter
setting via LAN connection.
AUTO LED is ON.
up/down
and
AUTO LED is ON.
working
working
18
Need help?
Do you have a question about the OM2000A+ and is the answer not in the manual?