OM POWER OM2000A+ Manual page 58

Factory reset:
In the case of very abnormal behavior of the OM2000A+ it is possible to do a factory reset. This
will reset all the amplifier parameters back to the factory default values.
Press and hold the ON/OFF button and press the green Main power switch for several seconds
until the following display appears.
Important notice: Perform a Factory Reset only if absolutely necessary to clear abnormal
behaviour, because personalized settings, mainly CAT communication with TCVR,
antenna switch settings and any USER settings must be re-input.
If you are sure you want a full factory
reset, press YES.
Type of supported TCVR and
frequency are visible on the
AUTO LED is ON.
After the FACTORY RESET
completes the PA is ready for
operation.
Type of supported TCVR and
frequency are visible on the
AUTO LED is ON.
working
display.
working
display.
58