Infopia CLOVER A1c Self Instructions For Use Manual page 23

14. OPTIONS
Unpacking
The below pictures show the items which should be included for the standard of
SRP-III Package. If any items are damaged or missing, please contact with our
local representatives for technical assistance.
SPR-III
Interface cable(RS-232C)
CLOVER A1c Self • 44 •
AC-DC adaptor(9V, 2A)
Paper Roll
14. OPTIONS
Installation
STEP 1.
Push both cover latches and open the cover.
STEP 3.
Insert a paper roll and close the cover.
STEP 3.
After closing the cover cut the paper.
CAUTION
- Don't touch the print head. It can be very hot
after printing continuously for a long time.
- Make sure that the paper direction is correct.
CLOVER A1c Self • 45 •