Infopia CLOVER A1c Self Instructions For Use Manual page 22

14. OPTIONS
STEP 6. Collect the sample blood using the lancing device and apply it on the
glucose test strip.
STEP 7. The analyzer will display the blood glucose test result..
or
3
STEP 8. Once the test is complete, slide the ejector button forward to remove
the glucose test strip from the glucose test module.
You don't want more glucose test, disconnect the glucose test module
from the CLOVER A1c™ Self analyzer.
CLOVER A1c Self • 42 •
5 123
mg/dl
14. OPTIONS
14.2 Printing Test Results with the Thermal Printer
Connect the thermal printer to the analyzer with the interface cable(RS-232C).
The analyzer should be in stand-by mode.
USB Código de barras
On/Off 9V
The printer is already pre-set to either manual or automatic printing.
Please refer to page 15.
• Automatic : Prints automatically after every test.
• Manual : Prints only when printer button pressed.
When printer is in manual mode
STEP 1. Press the printer button after the result is displyed.
STEP 2. LCD will displayed 'Current' and 'ALL'
STEP 3. Press or to select one or the other and or press
• Current : Only that result will print.
• ALL : Every result in memory will print.
CLOVER A1c Self • 43 •
Impressora
.