Page 2
EasyGluco Blood Glucose Monitoring System Operation Manual...
Page 3
Apply sample until confirmation Test results in 9 seconds. window is completely filled before the to us. This will ensure that you receive any new information about your EasyGluco System. If you have any Meter begins to countdown. If the questions, please contact your local representative.
·Please pay close attention when handling blood. Improper procedures may cause serious hazards to your health. Reviewing Your Results 20~21 Maintaining the EasyGluco Meter Caring for Your Meter Battery Troubleshooting 24~27 Specifications Warranty If you have any questions about the use of the EasyGluco product, please contact your local representative. Note EasyGluco EasyGluco...
Page 5
DISPLAY : Symbols, simple messages, and test results appear here. of purchase or contact your nearest Infopia representative. MEM BUTTON : Use for reviewing past records and setting for Time,Date, Month and Year(Refer to pages 12, 13, 20 and 21).
EasyGluco Blood Glucose Test Strip EasyGluco Blood Glucose Meter Display LCD display segment The EasyGluco System measures the amount of glucose in your blood. System Check Appears with the Memory empty Strip code number Blood is applied to the Top Edge of...
·The Check Strip automatically checks the Meter when inserted container. into the Test Port. A V symbol will appear on the LCD screen, Immediately replace the vial cap and close tightly after removing an EasyGluco Test Strip. indicating that the Check has been made.
Important: Each time you test, be sure to check that the code number on the meter display matches the code number on the Test Strip vial. The control solution test is similar to a blood test except that you use the EasyGluco Control Solution instead of a drop of blood. [ 7 ]...
Page 9
Do CAUTION : The control solution range printed on the Test Strip vial is for the EasyGluco Control Solution only.
·Test Strip deterioration. days. To increase the number of days, press the SET button; holding the SET button down will increase the value at a quicker rate. ·Meter malfunction (Use the Check Strip in your EasyGluco kit to check the meter).
Do not use lancet if protective cover has been removed or damaged. before use and when new batteries are installed. You cannot test your blood glucose while in the setting Never share a lancet with anyone. mode. [ 13 ] INFOPIA [ 14 ] EasyGluco...
Testing Your Blood Before testing, be sure to read this section and the test strip package insert found in the test strip box carefully. Make sure you have all the necessary items to begin testing: EasyGluco Meter EasyGluco Blood Glucose Test Strip...
The blood on your finger will automatically draw into the applying channel of the test strip (on the electrode). Allow your finger ㎕ toremain untill you hear a beep sound from the EasyGluco Meter. A sample volume of 3 is required STEP 1.
The meter enters Reviewing Your Results mode by pressing the MEM button. STEP 4. Record the result value in your EasyGluco logbook. This will help you reference your blood glucose levels historically. When the testing is complete, discard the used test strip and lancet to a proper place. Make sure to retain all necessary EasyGluco items in the leather case for your next test.
Do not refrigerate. Avoid exposure to the sun. 4. For detailed instructions of the EasyGluco Test Strip, refer to the test strip package insert found in the EasyGluco Test Strip box.
Problems that you may encounter : Following may help you to identify certain problems but may not represent all the problem that occurs. to perform about 5,000 tests. When replacing the battery, 3.0V (CR2032 or equivalent) lithium battery can only be used. Please avoid any IMPROPER use of the meter and the parts associated with the EasyGluco System.
If you believe that your result is incorrect, recheck the meter by No saved data 10mg/dL (0.6mmol/L) using the EasyGluco Control Solution. With normal result, re-test with blood samples two or three times. LO results indicate severe hypoglycemia (low blood glucose). If the LO message persists, please contact your physician or diabetes healthcare professional.
Battery Life running 5000 tests The codes of the meter and Re-code the meter and re-test. Calibration Plasma-Equivalent Glucose Unit Either mmol/L or mg/dL of the test strip vial do not match [ 27 ] INFOPIA [ 28 ] EasyGluco...
Meter or equivalence free of charge. 98/79/EC on invitro diagnostic medical devices. Manufactuing date The Warranty Policy of Infopia only applies to the original purchaser of the Meter and will not include Caution, consuit accompanying documents the batteries supplied with the Meter set.
Need help?
Do you have a question about the EasyGluco and is the answer not in the manual?
Questions and answers