Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
Switching the Device On and Off
THE DEVICE HAS TWO CONTROLS FOR SWITCHING IT ON AND OFF:
— The mains switch
switch connects or disconnects the standby power supply to/from the mains.
— The on/off switch
of the device. Toggling the on/off switch switches the device
between standby mode and operational mode.
TO SWITCH THE DEVICE FROM OFF TO STANDBY:
$
Move the mains switch
The device switches to standby mode. The LED
$
TO SWITCH THE DEVICE ON FROM STANDBY MODE:
Pull the on/off switch
$
button
The LED
$
Once start-up is complete, the LED
$
The power amplifier is now ready for operation.
$
TO SWITCH THE DEVICE FROM OPERATIONAL TO STANDBY MODE:
Pull the on/off switch
press the POWER button
The LED
$
Once this process is complete, the LED
$
3 6 | 4 6
(10)
is located on the rear of the device. Toggling the mains
is located on the control panel on top
(18)
WARNING: HIGH-INTENSITY SOUND
Loud output signals can damage your hearing.
Before switching on the power amplifier, reduce the volume on your
$
preamplifier to a low level and only increase the volume after switching on
the power amplifier.
To prevent hearing loss, avoid listening at high volumes for long periods
$
of time.
on the rear of the device to the I position.
(10)
on the control panel towards you or press the POWER
(18)
on the remote control.
(21)
(1)
flashes green while the device is starting up.
(18)
on the control panel towards you or
(21)
on the remote control.
flashes red while the power amplifier is switching to standby mode.
(1)
(1)
lights up red.
remains steadily green.
(1)
(1)
remains steadily red.
Advertisement
Table of Contents
