Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
SERIAL NUMBER
In order to view the serial number of your preamp 088 after switching on the device,
the function needs to be activated.
You will find the activation options in the GLOBAL SETUP in submenu SNR.
For specific instructions please refer to THE SETUP MENUS/ GLOBAL SETUP.
SWITCHING OFF CONTROL ELEMENTS OF DEVICE
In order to prevent undesired control of the preamp
controlling elements on the front panel (except the POWER switch).
Then all functions are only operable via remote control. This provides a child proof
lock option.
This option can be found in the GLOBAL SETUP in submenu FRONT-P.
For specific instructions please refer to THE SETUP MENUS/ GLOBAL SETUP.
INITIAL VOLUME
After switching on your preamp
The range of this setting extends from volume 01 and -79 dB respectively up to
20 and -60 dB respectively. If the setting LAST is chosen, the volume that was last
selected will be used. For security reasons, this is only possible up to a maximum
volume of 20 and. -60 dB respectively.
You will find the adjustment options in the MAIN SETUP in submenu VOL.
For specific instructions please refer to THE SETUP MENUS/ MAIN SETUP.
The different functions of the Phono MC and Phono MM module are available in
THE SETUP MENUS / PHONO SETUP and THE SETUP MENUS / MC SETUP,
THE SETUP MENUS / MM SETUP respectively.
2 2 | 4 6
, it is possible to lock all
088
, a certain volume is set.
088
The Setup Menus
The SETUP menus of the preamp
basic settings as well as special functions. Changes in some of the settings have an
impact on the reproduction of the signal. We recommend, selecting a moderate
volume level before activating a setup.
NOTICE:
While the SETUP menu is active, the volume selector (6) on
the front panel of the
menu items. During this procedure the volume level can only be changed
by the volume buttons on your remote control.
Activating the SETUP Menus
GLOBAL SETUP:
Pushing down the switch key (13) or longer pressing (approx.
button on your remote control activates the GLOBAL SETUP.
MAIN SETUP:
Pulling up the switch key (13) or shortly pressing the MENU button on your remote
control activates the MAIN SETUP.
PHONO SETUP:
Pulling up the switch key (10) or shortly pressing the AUDIO button on your remote
control activates the PHONO SETUP.
This menu can only be activated, if a PHONO MC or PHONO MM module is equipped
and the PH-MC or PH-MM input is selected.
AS EQUIPPED:
MC SETUP:
Pushing down the switch key (10) or longer pressing (approx.
AUDIO button on your remote control activates the MC SETUP.
This menu can only be activated, if a PHONO MC module is implemented and the
PHMC input is selected.
MM SETUP:
Pushing down the switch key (10) or longer pressing (approx.
AUDIO button on your remote control activates the MM SETUP.
This menu can only be activated, if a PHONO MM module is implemented and the
PHMM input is selected.
0 8 8
P R E A M P
allow comfortable programming of certain
088
serves to change the settings of the various
088
seconds) the MENU
2
seconds) the
2
2
seconds) the
2 3 | 4 6
Advertisement
Table of Contents
