23
21
22
23
CHOOSING THE COLOURS OF THE FRONT LED
You can use the remote control to adjust the colour scheme of
the front LED (1) to your liking. You have 2 options:
Standby = red, ON = green
1.
Standby = orange, ON = red
2.
To change the colour scheme, the device must be switched on.
To change the colours, press the number combination "2
6 2 4" and then "OK" on the remote control.
THE BURMESTER REMOTE CONTROL
(OPTIONAL)
Switch the device on or to standby mode.
Toggle the damping factor between FIXED / VARIABLE
Toggle through the different modes of
the auto power down function:
OFF
Switched off
SHORT
30 minutes
MID
60 minutes
LONG
120 minutes
1 5 9
M O N O
P O W E R
21
22
A M P L I F I E R
2 3 | 4 6