Burmester 159 Operation Manual page 13

Mono power amplifier
Hide thumbs Also See for 159:
Table of Contents

Advertisement

ATTENTION: HAZARDOUS VOLTAGE
To fully disconnect the device from the mains,
you have to unplug the mains plug.
ATTENTION:
Switch off all devices in your hi-fi system before installation. Do not switch
$
these devices on again until you are sure that all devices are completely and
correctly connected.
Do not attempt to operate the device if it is obviously damaged or if liquid has
$
gotten in it.
CAUTION: HEAT GENERATION
During operation, the housing of the 159 can
heat up to 70° C at the places marked.
Be careful when touching the device.
$
ATTENTION: OPERATING THE DEVICE DURING THUNDERSTORMS
It is not sufficient to switch off the mains switch on the back of the device.
$
During thunderstorms or when there is a risk of lightning strikes, disconnect
the device from the power supply by unplugging the power cable from the
device or the mains socket. To be safe, also unplug all connected components
from the power supply.
DANGER:
OPENING THE DEVICE
There are dangerous voltages inside the housing, regardless
of whether the power cable is connected or disconnected!
Do not open the device.
$
REPLACING FAULTY FUSES
If you cannot switch on the device even though the mains voltage is connected,
the reason might be a faulty fuse. This can have various causes.
Have the device checked by your dealer. Only authorized personnel are
$
permitted to change the fuses.
WHEN STARTING THE DEVICE
1 5 9
M O N O
P O W E R
A M P L I F I E R
1 3 | 4 6

Advertisement

Table of Contents
loading

Table of Contents