Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
2.3
Overview - Engine Coolant Temperature Sensor
1 - Clip
❑ Check for secure fit
2 - O-Ring
❑ Always replace after re‐
moving.
❑ Coat with coolant
3 and 4 - O-Rings
❑ Installation instructions.
Refer to ⇒ Servicing –
4-Cylinder 2.0L 4V TFSI
Engine (EA 888 Gener‐
ation III); Rep. Gr. 19 ;
Coolant Pump/Coolant
Thermostat; Overview -
Engine Coolant Tem‐
perature Sensor .
5 - Engine Coolant Tempera‐
ture Sensor - G62-
❑ On transmission side of
the cylinder head
❑ Removing and instal‐
ling. Refer to ⇒ Servic‐
ing – 4-Cylinder 2.0L 4V
TFSI Engine (EA 888
Generation III); Rep.
Gr. 19 ; Coolant Pump/
Coolant Thermostat;
Engine Coolant Tem‐
perature Sensor - G62- ,
Removing and Instal‐
ling .
6 - Bolt
❑ Tightening specifica‐
tions. Refer to ⇒ Serv‐
icing – 4-Cylinder 2.0L
4V TFSI Engine (EA 888
Generation III); Rep. Gr. 19 ; Coolant Pump/Coolant Thermostat; Overview - Engine Coolant Temper‐
ature Sensor .
7 - Engine Coolant Temperature Sensor on Radiator Outlet - G83-
❑ Removing and installing. Refer to
⇒ "2.10 Engine Coolant Temperature Sensor on Radiator Outlet G83 , Removing and Installing",
page 108
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
102
Rep. Gr.19 - Cooling System