Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
– Remove the lock carrier cover. Refer to ⇒ Body Exterior; Rep.
Gr. 63 ; Front Bumper .
– Remove the bolts -arrows- and the air guide -2-.
– Remove the vacuum hose -3-.
– Loosen the hose clamp -2- and remove the air duct hose.
– Pull the air filter housing -1- upward.
– Release the latch in direction of -arrow B- and open the E-box
-1- in direction of -arrow A-.
– Remove the nut -2- and free up the B+ wire.
– Free up the upper wiring duct.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the nuts -1- from the front muffler accessible from the
top. (Nut -2- and bolt -3- are removed later.)
6
Rep. Gr.10 - Engine Assembly