Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
– Remove the nut -2- and bolt -1- and remove the intake mani‐
fold support.
– Remove the connector -2- for the Exhaust Gas Temperature
Sensor 3 - G495- from the bracket and disconnect.
– Open the clip -3- and free up the vacuum hose.
– Remove the bolt -1- and the bracket. There are different ver‐
sions.
– Free up and disconnect the connector -1- for the Exhaust Gas
Temperature Sensor 4 - G648- .
– Free up the wires.
– Remove the bolts -1 and 2- and move the left coolant pipe to
the side.
WARNING
The fuel system is under pressure.
Risk of injury from fuel spraying out.
– Wear protective eyewear.
– Wear safety gloves.
– Reduce the pressure: place clean cloths around the con‐
nection point and carefully open the connection point.
156
Rep. Gr.24 - Multiport Fuel Injection
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.