Audi A4 2015 Repair Manual page 25

4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
– Loosen the hose clamp -1- and remove the air duct hose and
remove downward.
– Place the container of the -VAS5014- or the -VAS6208- un‐
derneath.
– Lift the clamp -2- and remove the coolant hose from the lower
right of the radiator and drain the coolant.
– Remove the bolts -arrows- and push the wiring duct downward
-1-. There are different versions.
– Remove the A/C compressor from the bracket. Refer to ⇒
Heating, Ventilation and Air Conditioning; Rep. Gr. 87 ; A/C
Compressor; A/C Compressor, Removing and Installing at
Bracket .
– Loosen the hose clamp -arrow- and remove the air duct hose
at the right from the turbocharger.
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1. Engine, Removing and Installing
19