Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
– Drain the coolant. Refer to
⇒ "1.3 Coolant, Draining and Filling", page 96
– Remove the front muffler. Refer to
⇒ "1.3 Front Muffler, Removing and Installing", page 174
– Remove the nut -2- from below. (The nuts -1- will be removed
later.)
– Remove the air filter housing. Refer to
⇒ "2.2 Air Filter Housing, Removing and Installing",
page 150
.
– Disconnect the connector -1- for the Oxygen Sensor 1 After
Catalytic Converter - GX7- -2- and free up the wires.
– Remove the nuts -1- from above and move the catalytic con‐
verter toward the rear.
– Remove the bolt -arrow- and remove the crankcase ventilation
hose from the turbocharger.
114
Rep. Gr.19 - Cooling System
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
.
.