Device Check" Submenu; Device Check; Start Device Check; Result Device Check - Endress+Hauser Levelflex FMP53 HART Operating Instructions Manual

Levelflex FMP53 HART

Start device check

Navigation
Description
Selection
Factory setting
Additional information

Result device check

Navigation
Description
Additional information
Last check time
Navigation
Description
Endress+Hauser
16.4.7

"Device check" submenu

Navigation  Diagnostics → Device check
 Diagnostics → Device check → Start device check
Start a device check.
• No
• Yes
No
In the case of a lost echo a device check can not be performed.
 Diagnostics → Device check → Result device check
Displays the result of the device check.
Meaning of the display options
• Installation ok
Measurement possible without restrictions.
• Accuracy reduced
A measurement is possible. However, the measuring accuracy may be reduced due to the
signal amplitudes.
• Measurement capability reduced
A measurement is currently possible. Howerver, there is the risk of an echo loss. Check
the mounting position of the device and the dielectric constant of the medium.
• Check not done
No device check has been performed.
 Diagnostics → Device check → Last check time
Displays the operating time at which the last device check has been performed.
Operating menu

189