Access Status Display; Enter Access Code - Endress+Hauser Levelflex FMP53 HART Operating Instructions Manual

Operating menu

Access status display

Navigation
Prerequisite
Description
Additional information

Enter access code

Navigation
Description
User entry
Additional information
126
 Setup → Advanced setup → Access status display
The device has a local display.
Indicates access authorization to parameters via local display.
The access authorization can be changed via the Enter access code parameter
(→  126).
If additional write protection is active, this restricts the current access authorization
even further. The write protection status can be viewed via the Locking status
parameter (→  125).
 Setup → Advanced setup → Enter access code
Enter access code to disable write protection of parameters.
0 to 9 999
• For local operation, the customer-specific access code, which has been defined in the
Define access code parameter (→  169), has to be entered.
• If an incorrect access code is entered, the user retains his current access authorization.
• The write protection affects all parameters marked with the
On the local display, the -symbol in front of a parameter indicates that the parameter
is write-protected.
• If no key is pressed for 10 min, or the user switches from the navigation and editing
mode back to the measured value display mode, the device automatically locks the write-
protected parameters after another 60 s.
Please contact your Endress+Hauser Sales Center if you lose your access code.
Levelflex FMP53 HART
-symbol in this document.
Endress+Hauser