Can-Am OUTLANDER 6x6 2021 Series Operator's Manual page 148

MAINTENANCE PROCEDURES
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of brake pedal fluid reser-
voir.
vmo2012-012-035_a
1. Rear brake fluid reservoir
Adding Brake Fluid
Clean filler cap.
WARNING
Clean filler cap before removing.
Remove screws retaining the reservoir
cap.
Remove reservoir cap.
Add fluid as required using a clean fun-
nel. Do not overfill.
NOTICE
Brake fluid can damage
plastic and painted surface. Wipe
off and clean any spillage.
Reinstall reservoir cap and tighten
screws.
NOTE: Ensure filler cap diaphragm is
pushed inside before to close the cap
on brake fluid reservoir.
Recommended Brake Fluid
Always use brake fluid meeting the
specification DOT 4 only.
______________
146
WARNING
To avoid damage to the braking
system, do not use other brake
fluid types.
Brake Inspection
CAUTION The brakes can be
very hot after prolonged use of the
vehicle and can cause burns. Wait
for the brakes to cool down.
The brake inspection, maintenance
and repair should be performed by an
authorized Can-Am dealer.
However, verify the following between
visits to your dealer:
– Brake fluid level
– Brake system for fluid leaks
– Brake cleanliness.
WARNING
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.